top of page

   MS Multipurpose Glue 

High-grade and strong Modified-Silicone waterproof glue for consumers.

High durability, easy-to-use, no mixing & no drill. Suitable for your DIY projects, household usage, vehicle parts, electronic repair, and other different kinds of applications, bonding well with wide-range substrates.

Learn More >

cosmetic_tube_mockup_latest.png
product packagin2.png
Features

Features

5117 - Weight.png

30

*up to

DSC03894_edited.jpg

kg/cm²

Super Strong Adhesion from Everbonder® MS glue

Easily lift 240 kg with different kinds of substrate

*The number is only for reference of maximum bonding strength has been tested in our lab after 7 days fully cured, different substrate and environment may have different result.

Bond well with any type of solid material

Everbonder® MS glue will bond well with Wood, Metal, Ceramic, Plastic, Glass, and other types of solid material. You can rest easy knowing it sticks well with almost everything.

Material
金屬
木頭
陶瓷
壓克力
石頭
磚塊
玻璃
混凝土
塑膠*
Flowable (Clear)
Flowable (Black/White)
Non-Flowable (Black/White)
種類
金屬
木頭
陶瓷
壓克力
石頭
磚塊
玻璃
混凝土
塑膠*
易流動型(透明)
易流動型(黑/白)
不易流動型(黑/白)

=best

=better

=good

*bond most plastic, except polypropylene (PP) or polyethylene (PE)

Everbonder® MS glue is weather-resistant. Its bonding strength withstands UV-light from the sun, rain, low-high temperature, high humidity, making you able to stick it almost everywhere, indoor and outdoor. All of these features make MS adhesive sealant superior compared to traditional PU and silicone sealants.

☑ No bubbling
☑ No cracking
☑ Low shrinkage
☑ Non-staining

Weather-Resistant

Paintable

Traditional silicone sealant can't be painted over. Everbonder® MS Adhesive Sealant is paintable with most water and oil-based paints for color matching purpose.

everbonder paintable
Everbonder® 
Traditional
Silicone

Works Underwater

Everbonder® MS sealant is able to cure on the wet surface, it even works and is cured underwater. it's suitable for your fish tank project.

Low Odor

No worries about a bad smell and toxic chemical release, when applying Everbonder® MS Sealant in your bathroom or kitchen because it's solvent-free.

DSC04190.jpg
How-to-Choose

How to choose

We made a different type of viscosity to solve most of the glue problems. Choose your suitable one

Flowable

Non-Flowable

How-to-use
DSC03710.jpg

How to Use

1. Cut the tip of the nozzle

2. Install
the nozzle

3. Apply on the surface

4. Press and fixate it with tape/clamp

5. Fix entirely after
4 hours 

Product Package
Product Package
left-box.jpg
front-box.jpg
right box.jpg

Packaging Box

1x Surface Cleaning Wipes

1x Nozzle

1x Glue Spreader

Everbonder®

MS Glue

Product Info
  • Technical Specification
    🔍Multipurpose Glue 🔍Structural Epoxy Glue 🔍Structural Acrylic Glue 🔍Epoxy Resin for Potting ☁️EverBonder® Multipurpose Glue Packaging Box Size: 50 x 30 x 133 mm Product Size: ø27 x 46 x 115 mm Resin Type: Modified Silicone Feature: Strong adhesion, versatile, easy to use, multi-piurpose, waterproof glue Open Working Time: 5-10 minutes Recommended Fix Time: 30-60 minutes (Non-Flowable), 1-2 hours (Flowable) *Fix time also depend on the object weight, room temperature, and humidity Full Curing Time: 7 days Available Color: Black, White, & Clear (Flowable) Black & White (Non-Flowable) Finishing: Sandable & Paintable Shelf Life: 3 years ☁️EverBonder® Structural Epoxy Glue Packaging Box Size: 71 x 46 x160 mmProduct Size: 46 x 25 x 120 mm(Ratio: 1:1 and 2:1) Resin Type: Epoxy Feature:This series of products has the characteristics of high bonding strength, shock resistance, fast curing, flame retardant, waterproof, acid and alkali corrosion resistance, etc... and is environmentally friendly. It can be safely used in household products, metal products, models , cracks and other different types of applications. Open Working Time: Fast curing version- 5 minutes; Slow curing version- 30 minutesRecommended Fix Time: 30-60 minutes *Fix time also depend on the object weight, room temperature, and humidity Full Curing Time: Fast curing version- 3 hours; Slow curing version-12 - 24 hours Product Category: Flame Retardant, Fast, Non-Flowable , Black-EB001B1 Fast, Non-Flowable, White-EB001W1 Fast, Flowable, Clear-EB001C Flame Retardant, Slow, Non-Flowable , Black-EB002B1 Slow, Non-Flowable, White-EB002W1 Slow, Flowable, Clear-EB002C Shelf Life: 2 years ☁️EverBonder® Structural Acrylic Glue Packaging Box Size: 71 x 46 x 160 mm Product Size: 45 x 33 x 122 mm(Ratio: 10:1) Resin Type: Acrylic Feature: This product is suitable for all kinds of plastic materials, including those that are difficult to bond (such as PP, PA, PE) due to their low surface energy. It offers fast curing, high bonding strength, chemical resistance, and is environmentally friendly. Open Working Time: 10 minutes Recommended Fix Time: 15-30minutes *Fix time also depend on the object weight, room temperature, and humidity Full Curing Time: 12 hours Product Category: Fast, Non-Flowable, White-AB001W1 Shelf Life: Refrigerated for 1 year ☁️EverBonder® Epoxy Resin for Potting PackagingSize: Big size : 700g(A) 75 x196mm 350g (B) 62 x165mm Small size : 400g(A)62 x165mm 200g(B) 50 x146mm Resin Type: Epoxy Feature:he product has the characteristics of weather resistance, easy defoaming, anti-yellowing, high transparency, low odor, etc... and it is environmental friendly which can be apply in many field. Open Working Time: Fast curing - 2 hours; Slow curing - 6 hours Full Curing Time: Fast curing - 12~24 hours; Slow curing- 1~2 days Product Category: Fast,Clear-EP001C Slow,Clear-EP002C Shelf Life: 2 years
  • Usage Direction
    🔍Multipurpose Glue 🔍Structural Epoxy Glue 🔍Structural Acrylic Glue 🔍Epoxy Resin for Potting 📜EverBonder® Multipurpose Glue How-to-use: 1. Take out the cap and remove the aluminum foil. 2. Install the nozzle on the tube and cut it to the size that you prefer. 3. Clean the surface before applying the glue. 4. Squeeze the glue on the substrate and bond it with the other parts. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Do not move the substrate for 30 to 60 minutes. 7. It can be fixed entirely after 12 to 24 hours. After 7 days, it can reach maximum strength. Storage: 1. Use the cloth to clean a tube and a nozzle. Please make sure there is no residual glue left on the tube. 2. Seal the container immediately and tightly after used. 3. Store in a dry place and keep it away from moisture. 4. Keeping in an air-tight bag and cool temperature (14-34°C) for longer shelf life. 5. The glue can be kept for 3 years from the production date. Reuse: 1. Use a pin to pry out the dried chunks of glue inside the tube. 2. Squeeze the glue out to make sure there is no residual glue left. 📜EverBonder® Structural Epoxy Glue Usage without mixing tube 1. Clean the surface before applying the glue. 2. Take out the cap from the cartridge and wear gloves 3. Apply the small amount of glue on the empty board and make sure it mixed well with a plastic stick. 4. Use the plastic stick to spread the glue evenly on the substrates which need to be bonded. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Depend on the thickness of the glue, do not move the substrate for within 30 to 60 minutes to avoid displacement and unstable joints. 7. After use, please wipe the glue outside cartridge with pieces of cloth and return the cap on cartridge. 8. Fast curing version: the glue will fully cure and achieve maximum bonding strengthafter 3 hours. Slow curing version: the glue will fully cure in 12 to 24 hours and achieve maximum bonding strength 7 days Usage with mixing tube 1. Clean the surface before applying the glue. 2. Take out the cap from the cartridge, wear gloves and install the mixing tube to the cartridge. 3. Apply the small amount of glue on the empty board, dispense and discard approximately one ml of glue because it has not been mixed evenly. 4. Begin applying the glue to substrates which need to be bonded. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Depend on the thickness of the glue, do not move the substrate for within 30 to 60 minutes to avoid displacement and unstable joints. 7. After use, please wipe the glue outside cartridge with pieces of cloth and return the cap on cartridge. 8. Fast curing version: the glue will fully cure and achieve maximum bonding strengthafter 3 hours. Slow curing version: the glue will fully cure in 12 to 24 hours and achieve maximum bonding strength 7 days. Reuse 1. Use a pin to pry out the dried chunks of glue inside the tube. 2. Squeeze the glue out to make sure there is no residual glue left then continue using Storage 1. Use the cloth to clean a tube and a nozzle. Please make sure there is no residual glue left on the tube. 2. Seal the container immediately and tightly after used. 3. Store in a dry place and keep it away from high temperature and moisture. 4. Keeping in an air-tight bag and cool temperature (14-34°C) for longer shelf life. 📜EverBonder® Structural Acrylic Glue Usage without mixing tube 1. Clean the surface before applying the glue. 2. Remove the cap from the cartridge and wear gloves. 3. Squeeze out the glue with a push rod and mix evenly with a wooden stick. 4. Use the wooden stick to spread the glue evenly on the substrates which need to be bonded. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Depend on the thickness of the glue, do not move the substrate for within 15 - 30 minutes to avoid displacement. 7. After use, please wipe the glue outside cartridge with pieces of cloth and return the cap on cartridge. 8. The adhesive will fully cure and achieve maximum bonding strengthafter 12 hours. Usage with mixing tube 1. Clean the surface before applying the glue. 2. Remove the cap from the cartridge and wear gloves. 3. Install the mixing tube to the cartridge, squeeze out the glue with the push rod and discard approximately one ml of glue because it has not been mixed evenly. 4. Begin applying the glue to substrates which need to be bonded. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Depend on the thickness of the glue, do not move the substrate for within 15 - 30 minutes to avoid displacement. 7. After use, please wipe the glue outside cartridge with pieces of cloth and return the cap on cartridge. 8. The adhesive will fully cure and achieve maximum bonding strengthafter 12 hours. Reuse 1. Use a pin to pry out the dried chunks of glue inside the tube. 2. Squeeze the glue out to make sure there is no residual glue left then continue using Storage 1. Use the cloth to clean a tube and a nozzle. Please make sure there is no residual glue left on the tube. 2. Seal the container immediately and tightly after used. 3. Store in a dry place and keep it away from high temperature and moisture. 4. Keeping in an air-tight bag then put product in refrigerator (2~13°C) for longer shelf life. 📜EverBonder® Epoxy Resin for Potting Usage Direction Mixing Resin 1. After mixing according to the proportion, mix glue evenly with the stirring rod for5 to 10 minutes. 2. Be sure to stir until the glue is clear and completely mixed after at least 5 minutes. 3. When mixing, use a stir stick to scrape the bottom and edges to ensure the glue is evenly mixed 4. If you need to add pigments or glitter, it is recommended to add them after the A and B agents are evenly mixed and before defoaming 5. Although the product is a low-odor product, it may release a slight smell. It is recommended to use it in well-ventilated place. Defoaming 1. The bubbles in the glue can be eliminated by heating. 2. You can use hot water around 60 degrees or a heated coaster to speed up the bubbles bursting. The bubbles will gather in the middle. At that time, you can use toothpicks to move the bubbles to the edges to remove them. 3. You also can use the vacuum machine to eliminate bubbles. This method can eliminate bubbles completely. 4. After defoaming is completed, pour the glue into the prepared mold. Decorative materials can be added at this time. (Ex: flower, specimens, sequins) Potting 1. If there is a large amount of potting required, please use slow curing epoxy resin and infuse in batches. 2. Recommended potting volume for slow curing epoxy resin : 1kg; volume about 17.5cm*6.5cm*6cm. Recommended volume for fast curing epoxy resin: <100g 3. When pouring multiple layers, the second layer should be poured only after the first layer cools down. Otherwise, continuous accumulation will cause excessive heat release. Demoulding 1. It is necessary to to confirm that the glue has completely cured before demoulding. 2. Be aware that the corners will be a little sharp when removing the glue out of the mold Storage 1. Seal the container immediately and tightly after used. 2. Store in a dry place and keep it away from high temperature and moisture. 3. Store product at room temperature (14-34°C)
  • FAQs
    🔍Multipurpose Glue 🔍Structural Epoxy Glue 🔍Structural Acrylic Glue 🔍Epoxy Resin for Potting 🌍EverBonder® Multipurpose Glue 1. What is the size of MS multipurpose glues? MS multipurpose glue is available in 50ml. 2. What is the shelf life of MS multipurpose glue? EverBonder MS multipurpose glue can be stored for 3 years (Unopened glue). 3. How many colors of MS multipurpose glue? Flowable: White, Black, and Clear. Non-flowable: White and Black. 4. Do the MS multipurpose glues work underwater? It can work underwater and be cured underwater, such as water tubes, rainwater tanks, aquariums, etc. 5. Do the MS multipurpose glues have the flexibility? It has flexibility after full-cured. 6. Can we apply the paint on MS multipurpose glues? Yes, both water-based and oil-based paints are not problems with the MS multipurpose glues. 7. Do MS multipurpose glues have UV resistance? The UV rays are not affecting the MS multipurpose glues and also the glues are not broken due to the sunlight. For the outdoor application, we would suggest the black color because clear and white color will have a yellowing effect when it is exposed to UV light. 8. How long does it take to fully cure? After applying the glue, it needs to use the tape, binder clips, clamps, etc., for a temporary holder for around 1-2 hours. MS multipurpose glues need 12-24 hours for full cure. It can reach maximum strength after 7 days. It is totally not a big problem with 200kgs. 9. What temperature can MS multipurpose glues stand after it is fully cured? MS multipurpose glues can stand for -40°C to 100°C. 10. How to remove and clean the residue glue before curing? Before curing, you can use the Isopropyl alcohol to clean. 11. How to remove and clean the residue glue after curing? It needs to use the hair dryer's heat to make the glue soft and then use the scraper to remove it. (Due to the high bonding strength of the adhesive, it may slightly affect the surface substrate material). 12. Is the transparent type will change the color after curing? The transparent would same as non-curing glue. 13. What temperature can we keep MS multipurpose glues? Keep in an air-tight bag and store it at room temperature (14-34°C) or put in the refrigerator to avoid drying and longer shelf life. 14. Would MS multipurpose shrink after curing? It would not shrink after curing. 15. Does it feel irritating when touched? No, it is not. For the sensitive person, please wear the glove before using it. In case of accidental contact with eyes, skin, breathing, or ingestion, seek medical attention immediately. 16. What kind of material do not suitable for MS multipurpose glues? MS multipurpose glues are not suitable to use on Polypropylene (PP) and Polyethylene (PE). 🌍EverBonder® Structural Epoxy Glue 1. What is the size ofStructural Epoxy glues? Structural Epoxy gluesis available in 50ml. 2. What is the shelf life of Structural Epoxy glue? EverBonder Structural Epoxy glue can be stored for 3 years (Unopened glue). 3. How many colors of Structural Epoxy glue? The products are divided into two versions: fast and slow curing versions. They are categorized as general and flame-resistant, and are available in black, white, and clear colors. Details are as follows Flame Retardant, Fast, Non-Flowable , Black-EB001B1 Fast, Non-Flowable,White-EB001W1 Fast, Flowable ,Clear-EB001C Flame Retardant, Slow, Non-Flowable , Black-EB002B1 Slow, Non-Flowable , White-EB002W1 Slow, Flowable ,Clear-EB002C Both clear color products are flowable type, please notice the label of the product before using. 4. Do Structural Epoxy glues have UV resistance? The UV rays are not affecting the Structural Epoxy glues and also the glues are not broken due to the sunlight. For the outdoor application, we would suggest the black color because clear and white color will have a yellowing effect when it is exposed to UV light. 5. How long does it take to fully cure? Fast bonding version, use tape or clamps to secure the item. They can be removed after 30 to 60 minutes. EverBonder Structure Glue will fully cure after 3 hours and achieve maximum bond strengthSlow bonding version, use tape or clamps to secure the item. They can be removed after 30 to 60 minutes. EverBonder Structure Glue will fully cure after 12 to 24 hours and achieve maximum bond strength within 7 days. The curing speed depends on the amount of glue used and the working temperature 6. What temperature can Structural glues stand after it is fully cured? Working temperature range: -40°C~100°C 7. How to remove and clean the residue glue before curing? Before curing, you can use the Isopropyl alcohol to clean. 8. How to remove and clean the residue glue after curing? It needs to use a heat gun to soften the glue or submerge it in solvent such as MEK before using a scraper to remove it. However, please note that due to the high bonding strength of the adhesive, this process may slightly affect the surface substrate material. 9. Does it feel irritating when touched? No, it is not. For the sensitive person, please wear the glove before using it. In case of accidental contact with eyes, skin, breathing, or ingestion, seek medical attention immediately. 10. What kind of material do not suitable for structural epoxy glues? Structural epoxy glues are not suitable to use on Polypropylene (PP) and Polyethylene (PE) and Rubber. 🌍EverBonder® Structural Acrylic Glue 1. What is the size of Structural Acrylic glues? Structural Acrylic glue is available in 50ml. 2. What is the shelf life of Structural Acrylic glue? The unopened container canbe keep for 1 year 3. How many colors ofStructural Acrylic glue? It is available in white color only as followingFast, Non-Flowable,White-AB001W1 4. Do Structural Acrylic glues have UV resistance? The UV rays are not affecting the Structural Acrylic glues and also the glues are not broken due to the sunlight. For the outdoor application, we would suggest the black color because clear and white color will have a yellowing effect when it is exposed to UV light. 5. How long does it take to fully cure? Use tape or clamps to secure the item. They can be removed after 30 to 60 minutes. EverBonder Structure Glue will fully cure after 12 hours and achieve maximum bond strength.(The curing speed depends on the amount of glue used and the working temperature) 6. What temperature can Structural Acrylic glues stand after it is fully cured? Working temperature: -40~100°C 7. How to remove and clean the residue glue before curing? Before curing, you can use the Isopropyl alcohol to clean. 8. How to remove and clean the residue glue after curing? It needs to use a heat gun to soften the glue or submerge it in solvent(EX MEK) before using a scraper to remove it. However, please note that due to the high bonding strength of the adhesive, this process may slightly affect the surface substrate material. 9. Does it feel irritating when touched? No, it is not. For the sensitive person, please wear the glove before using it. In case of accidental contact with eyes, skin, breathing, or ingestion, seek medical attention immediately. 🌍EverBonder® Epoxy Resin for Potting 1. What is the size of EverBonder Epoxy Resin for Potting? There are two pacakging of product in this series Big size : 700g(A) and 350g (B) per set、 Small size:400g(A) and 200g(B) per set 2. What is the shelf life of EverBonder Epoxy Resin for Potting? EverBonder MS multipurpose glue can be stored for 2 years (Unopened glue). 3. How many colors of EverBonder Epoxy Resin for Potting? Products are divided into Fast curing and Slow curing;the color is only cystal clear, details are as follows Fast,Clear-EP001C Slow,Clear-EP002C 4.How do you defoam the air bubbles during curing? The bubbles in the glue can be eliminated by heating.The bubbles will gather in the middle. At that time, you can use toothpicks to move the bubbles to the edges to remove them. 5. How long does Everbonder epoxy resin will change to yellow? Everbonder epoxy resin contains an anti-yellowing agent, making it less likely to change color when exposed to sunlight. 6. How long does it take to fully cure? Fast curing of EverBonder Epoxy Resin for Potting need 12-24 hours for full cureSlow curing ofEverBonder Epoxy Resin for Potting need1~2 days for full cure(The curing speed depends on the amount of glue used and the working temperature) 7. How to remove and clean the residue glue before curing? Before curing, you can use the Isopropyl alcohol to clean. 8. Does it feel irritating when touched? No, it is not. For the sensitive person, please wear the glove before using it. In case of accidental contact with eyes, skin, breathing, or ingestion, seek medical attention immediately. 9. After the glue is completely cured, will it maintain its transparency? Yes, it will keep the same crystal clear color after the product is cured
  • Technical Specification
    🔍Multipurpose Glue 🔍Structural Epoxy Glue 🔍Structural Acrylic Glue 🔍Epoxy Resin for Potting ☁️EverBonder® Multipurpose Glue Packaging Box Size: 50 x 30 x 133 mm Product Size: ø27 x 46 x 115 mm Resin Type: Modified Silicone Feature: Strong adhesion, versatile, easy to use, multi-piurpose, waterproof glue Open Working Time: 5-10 minutes Recommended Fix Time: 30-60 minutes (Non-Flowable), 1-2 hours (Flowable) *Fix time also depend on the object weight, room temperature, and humidity Full Curing Time: 7 days Available Color: Black, White, & Clear (Flowable) Black & White (Non-Flowable) Finishing: Sandable & Paintable Shelf Life: 3 years ☁️EverBonder® Structural Epoxy Glue Packaging Box Size: 71 x 46 x160 mmProduct Size: 46 x 25 x 120 mm(Ratio: 1:1 and 2:1) Resin Type: Epoxy Feature:This series of products has the characteristics of high bonding strength, shock resistance, fast curing, flame retardant, waterproof, acid and alkali corrosion resistance, etc... and is environmentally friendly. It can be safely used in household products, metal products, models , cracks and other different types of applications. Open Working Time: Fast curing version- 5 minutes; Slow curing version- 30 minutesRecommended Fix Time: 30-60 minutes *Fix time also depend on the object weight, room temperature, and humidity Full Curing Time: Fast curing version- 3 hours; Slow curing version-12 - 24 hours Product Category: Flame Retardant, Fast, Non-Flowable , Black-EB001B1 Fast, Non-Flowable, White-EB001W1 Fast, Flowable, Clear-EB001C Flame Retardant, Slow, Non-Flowable , Black-EB002B1 Slow, Non-Flowable, White-EB002W1 Slow, Flowable, Clear-EB002C Shelf Life: 2 years ☁️EverBonder® Structural Acrylic Glue Packaging Box Size: 71 x 46 x 160 mm Product Size: 45 x 33 x 122 mm(Ratio: 10:1) Resin Type: Acrylic Feature: This product is suitable for all kinds of plastic materials, including those that are difficult to bond (such as PP, PA, PE) due to their low surface energy. It offers fast curing, high bonding strength, chemical resistance, and is environmentally friendly. Open Working Time: 10 minutes Recommended Fix Time: 15-30minutes *Fix time also depend on the object weight, room temperature, and humidity Full Curing Time: 12 hours Product Category: Fast, Non-Flowable, White-AB001W1 Shelf Life: Refrigerated for 1 year ☁️EverBonder® Epoxy Resin for Potting PackagingSize: Big size : 700g(A) 75 x196mm 350g (B) 62 x165mm Small size : 400g(A)62 x165mm 200g(B) 50 x146mm Resin Type: Epoxy Feature:he product has the characteristics of weather resistance, easy defoaming, anti-yellowing, high transparency, low odor, etc... and it is environmental friendly which can be apply in many field. Open Working Time: Fast curing - 2 hours; Slow curing - 6 hours Full Curing Time: Fast curing - 12~24 hours; Slow curing- 1~2 days Product Category: Fast,Clear-EP001C Slow,Clear-EP002C Shelf Life: 2 years
  • Usage Direction
    🔍Multipurpose Glue 🔍Structural Epoxy Glue 🔍Structural Acrylic Glue 🔍Epoxy Resin for Potting 📜EverBonder® Multipurpose Glue How-to-use: 1. Take out the cap and remove the aluminum foil. 2. Install the nozzle on the tube and cut it to the size that you prefer. 3. Clean the surface before applying the glue. 4. Squeeze the glue on the substrate and bond it with the other parts. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Do not move the substrate for 30 to 60 minutes. 7. It can be fixed entirely after 12 to 24 hours. After 7 days, it can reach maximum strength. Storage: 1. Use the cloth to clean a tube and a nozzle. Please make sure there is no residual glue left on the tube. 2. Seal the container immediately and tightly after used. 3. Store in a dry place and keep it away from moisture. 4. Keeping in an air-tight bag and cool temperature (14-34°C) for longer shelf life. 5. The glue can be kept for 3 years from the production date. Reuse: 1. Use a pin to pry out the dried chunks of glue inside the tube. 2. Squeeze the glue out to make sure there is no residual glue left. 📜EverBonder® Structural Epoxy Glue Usage without mixing tube 1. Clean the surface before applying the glue. 2. Take out the cap from the cartridge and wear gloves 3. Apply the small amount of glue on the empty board and make sure it mixed well with a plastic stick. 4. Use the plastic stick to spread the glue evenly on the substrates which need to be bonded. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Depend on the thickness of the glue, do not move the substrate for within 30 to 60 minutes to avoid displacement and unstable joints. 7. After use, please wipe the glue outside cartridge with pieces of cloth and return the cap on cartridge. 8. Fast curing version: the glue will fully cure and achieve maximum bonding strengthafter 3 hours. Slow curing version: the glue will fully cure in 12 to 24 hours and achieve maximum bonding strength 7 days Usage with mixing tube 1. Clean the surface before applying the glue. 2. Take out the cap from the cartridge, wear gloves and install the mixing tube to the cartridge. 3. Apply the small amount of glue on the empty board, dispense and discard approximately one ml of glue because it has not been mixed evenly. 4. Begin applying the glue to substrates which need to be bonded. 5. Hold it for a while, for some specific applications, you can use tape, binder clips, clamp, etc. for a temporary holder. 6. Depend on the thickness of the glue, do not move the substrate for within 30 to 60 minutes to avoid displacement and unstable joints. 7. After use, please wipe the glue outside cartridge with pieces of cloth and return the cap on cartridge. 8. Fast curing version: the glue will fully cure and achieve maximum bonding strengthafter 3 hours. Slow curing version: the glue will fully cure in 12 to 24 hours and achieve maximum bonding strength 7 days. Reuse 1. Use a pin to pry out the dried chunks of glue inside the tube. 2. Squeeze the glue out to make sure there is no residual glue left then continue using Storage 1. Use the cloth to cle